Do you feel irritated when you see the dents on your drywall? Are you searching on online How To Repair Drywall?
Well, that’s a kind of problem you can fix in no time and you don’t even need a carpenter or a handyman for that. You just need available tools and materials and proper guideline. If you are Carpenter or Handyman you have to must need Tools bag & Tools Belt. Our researcher team reviewed Top 10 Best Tools Bags and Top 10 Best Tools Belts.
Let’s dive in!
- A small, narrow saw to cut awkward part of the wall
Drywall knife or putty knife
- For spreading joint compound
- For spreading joint compound and creating a surface smooth.
Drywall screw gun or drill machine
- To secure things to the wall
- For cutting edge
- To make a surface bumpless and smooth
- To clean the spot after sanding
- To mix the joint compound
Screws and nails
- To secure wooden planks to the wall
- For dust protection
- For repairing and embedding the drywall
- For filling small holes, repairing small cracks
Self-adhesive metal patch
- Use to repair medium holes
- Use to repair medium and large holes
Fiberglass mesh tape
- To seal and secure the edges
- The backing of drywall frame
For small holes:
If you crack a small hole in your drywall while doing drilling stuff or something, don’t worry! You can fix this by no time!
First, take your utility knife and cut the edge of the hole. Make sure that the outside portion of the hole is larger than the inside ones.
Smooth the edges with the sanding paper, wipe off the dust with the sanding sponge.
Then, take out a thin amount of spackle (as needed) with the putty knife and apply it on the hole in a criss-cross way. Feather the edges. Apply another thin layer of the spackle after when the previous layer is fully dried. Again, feather the edges. Apply several cotes of the product following the same procedure.
Feathering means, spreading out the compounds from thicker to thinner layer of the product starting from the center towards the edges.
There are various colors of spackle. Pink, Purple etc. when the spackle is wet it shows the pink or the purple color. But it changes its color and become white when it’s dry.
Again, use the sanding paper to smooth the surface with the wall, wipe off excess dust with the sanding sponge. And it’s ready to paint!
For medium holes:
Okay, now when you have dealt with the small hole it’s time to teach you dealing with the medium ones so that you can easily handle it like a pro! For this, the main material you’ll need is drywall metal patch.
First, take out your drywall saw and even the edges of the holes. You have to give it a square shape. Because the metal patches that are used to fix the drywall are square. You can use a pencil and a level to mark the edges as your guide. You don’t have to be precise with the measurement.
Smooth the edges of the square with the sanding paper and wipe off the excess dust with the sanding sponge.
Take a drywall metal patch, peel off the metal frame and stick it over the square you have just made. These metal patches are self-adhesive. Therefore, you don’t need any extra glue.
Apply thinner layers of the joint compound one after another when the previous layer is completely dried. And of course, you have to feather the edges after the application of each layer of the joint compound. You can finish the application process at ease, with a blade knife.
Sand the whole surface, dust off the excess and the wall is ready to paint.
For larger holes:
What if you crack a bigger hole in your wall? How will you fix this? Well, don’t panic! For these types of a dent, you’ll need a drywall frame.
Cut out the oddly shaped dent into squares. And, cut out a drywall frame in the shape of the square you’ve just made.
You can cut the frame from your extra plank of drywall. Or you can buy it from the local home centers.
Smoothen out the edges with the sanding paper dust the excessive.
You need a backing for your drywall frame. Therefore, you need a couple of wooden blocks. They must be one or two inches larger in length than the square you have made.
Place the wooden planks lengthwise from the inside at the two sides of the square. Place the screws an inch away from the square’s edge. Give it a spin with the help of drywall screw gun. Place the drywall frame. Place the screws an inch inside of the frame’s edge. Screw it up with the drywall screw gun.
Then Seal the edges and the screws with the fiberglass mesh tape.
If you don’t have a drywall screw gun, you can use drilling machine too. But, you have to be gentle while working with it. Too much force may crack your wall and cause you an extra head budding.
You can use the dry joint compound for large dents. Mix the dry joint compound with water. Give it a nice muddy texture by stirring well and then apply all over the drywall patch. Apply thinner layer like before and feather the edges. Use blade knife for easier application.
There are lots of dry joint compound available in the market. Some take 20 minutes to set, some take 90 minutes to set. You just need to follow the preparation manual that comes with the product.
Sand the area with sanding paper and smooth it. Wipe off all the excess. Your wall is now ready to paint
- Always apply a thinner layer of the compound
- Let the previous layer fully dry before applying another one
- Apply the compound in a criss-cross motion
- Before paint always use drywall primer
- If your wall is textured, use a texture spray on the patch or you can dip a brush in the compound and flick it on to the patch in a forward motion.
- Always use a dust mask while sanding and dusting
- Be gentle with sanding- rough sanding may crack your compound coat
- Always clean the dent area before applying any product
- Look out for electric wires behind the walls before cutting and drilling it.
Repairing drywall is not that challenging when you have all the tools and proper guideline. You don’t even need to become hyper tensed. Simply follow the instructions and cautions and save your wall from the wreckage.